CHANGES IN Eureka 1.07 (r1716)

(Changes are since 1.00 version, r1416)

+ implemented Find and Replace (as a panel), with support for stepping though each item or selecting them all, and filters to control which items to visit or ignore

+ added 'File / New Project' command as the proper way to create a brand new WAD file. The 'New Map' command requires a current pwad, and will save the fresh map immediately into it

+ new 'RECENT' category for Texture/Flat/Thing browsers, and rebound the '\' key to toggle this category on/off

+ new 'Rename Map' and 'Delete Map' commands in FILE menu

+ improvement to key binding system, support for "flags" which are parameters beginning with a forward slash, such as "/new" and "/clear". The 'EditKey' dialog is now much easier to use too

+ Windows package no longer uses an installer

+ vertex reshaping commands:

   -  'I' moves selected vertices onto a line
   -  'O' moves them into a circle shape
   -  'D' moves them into a half-circle
   -  'C' moves them into a 120-degree arc
   -  'Q' moves them into a 240-degree arc

- a preference to show smaller textures in the browser

- map checker can find unknown linedef and sector types

- Linedef panel: swapped the 'Tag' and 'Length' positions

- Linedef panel: always show a two-sided line panel when multiple lines are selected (allowing all texture parts to be edited)

- Linedef panel: don't show rail/upper tex for one-sided lines (can be disabled with the 'show_full_one_sided' config var)

- when loading a wad specified on the command line, and it contains settings for the iwad, port and/or resources, then allow command line arguments to override those values (and _add_ new resources)

- new preference to maximize window on start (Linux, WIN32 only)

- the Default Properties now has its own panel

- Default Props: only a single wall texture now, and shows a sprite for the default thing which opens the browser when clicked on

- added back the '192' grid size

- browser: changed two key-bindings: 'T' now opens to Things and 'X' is used to open it to Textures (matching the menu shortcuts)

- browser: changed key-binding for BR_CycleCategory to '|'

- browser: the 'Sort' menu has been replaced with an 'Alpha' checkbox

- browser: made sprites a bit smaller, can now show three columns when browser is at minimum width

- better way to show how a linedef will be split (esp. when snapping)

- co-op player sprites are now colored as in DOOM

- 3D view: the low/high detail flag is now a preference setting (no longer toggleable with the F5 key)

- added info bar for 3D view, shows current position, angle, etc...

- added 'Toggle 3D View' command to View menu

- support loading a read-only wad file

- support data in a map header lump (such as MAP01), make sure to save it when saving the map (instead of removing it)

- node builder: added work-around for "TOO SIMPLE" levels (i.e. a single convex sector), creating a dummy node and an extra subsector and seg for the back side

- wrote a Unix man page

- vanilla DOOM: do not show "friend", "coop" or "sp" thing flags

- support -warp option being followed by two numeric arguments (episode and map number), compatible with vanilla DOOM

- when checking textures, ignore ones beginning with '#'

- show version _in_ the About box (not just the window title)

Bug Fixes:

- fixed not loading 'ASHWALL' texture for DOOM 1

- fixed bug when saving and using the 'ExMx' buttons (an erroneous newline was added into the map lump name)

- 3D view: fixed a vertical mis-alignment of textures (one pixel) in certain circumstances

- fixed occasional false positives with sector mismatch test

- fixed wrong focal point when zooming immediately after the 'j' (JumpToObject) command

- fixed category of linetype #68 (should be a raising floor)

- fixed clipping of mid-masked textures (e.g. the cage in E1M9)

- fixed not reloading textures (etc) when opening a new wad file

- fixed crash when trying to build nodes on an IWAD map which has some changes made to it, but has not been saved (exported) yet

- fixed key binding list so that pressing 'Bind', 'Copy' etc on a non-visible line will scroll to that line (make it visible)

- browser: fixed patterns like '4$' not working properly

CHANGES IN Eureka 1.07 (r1716)

(Changes since 1.00 version, r1416)

implemented Find and Replace (as a panel), with support for stepping though each item or selecting them all, and filters to control which items to visit or ignore
added 'File / New Project' command as the proper way to create a brand new WAD file. The 'New Map' command requires a current pwad, and will save the fresh map immediately into it
new 'RECENT' category for Texture/Flat/Thing browsers, and rebound the '\' key to toggle this category on/off
new 'Rename Map' and 'Delete Map' commands in FILE menu
improvement to key binding system, support for "flags" which are parameters beginning with a forward slash, such as "/new" and "/clear". The 'EditKey' dialog is now much easier to use too
Windows package no longer uses an installer
vertex reshaping commands:
'I' moves selected vertices onto a line
'O' moves them into a circle shape
'D' moves them into a half-circle
'C' moves them into a 120-degree arc
'Q' moves them into a 240-degree arc
a preference to show smaller textures in the browser
map checker can find unknown linedef and sector types
Linedef panel: swapped the 'Tag' and 'Length' positions
Linedef panel: always show a two-sided line panel when multiple lines are selected (allowing all texture parts to be edited)
Linedef panel: don't show rail/upper tex for one-sided lines (can be disabled with the 'show_full_one_sided' config var)
when loading a wad specified on the command line, and it contains settings for the iwad, port and/or resources, then allow command line arguments to override those values (and add new resources)
new preference to maximize window on start (Linux, WIN32 only)
the Default Properties now has its own panel
Default Props: only a single wall texture now, and shows a sprite for the default thing which opens the browser when clicked on
added back the '192' grid size
browser: changed two key-bindings: 'T' now opens to Things and 'X' is used to open it to Textures (matching the menu shortcuts)
browser: changed key-binding for BR_CycleCategory to '|'
browser: the 'Sort' menu has been replaced with an 'Alpha' checkbox
browser: made sprites a bit smaller, can now show three columns when the browser is at minimum width
better way to show how a linedef will be split (esp. when snapping)
co-op player starts are now colored as in DOOM
3D view: the low/high detail flag is now a preference setting (no longer toggleable with the F5 key)
added info bar for 3D view, shows current position, angle, etc...
added 'Toggle 3D View' command to View menu
support loading a read-only wad file
support data in a map header lump (such as MAP01), make sure to save it when saving the map (instead of removing it)
node builder: added work-around for "TOO SIMPLE" levels (i.e. a single convex sector), creating a dummy node and an extra subsector and seg for the back side
wrote a Unix man page
vanilla DOOM: do not show "friend", "coop" or "sp" thing flags
support -warp option being followed by two numeric arguments (episode and map number), compatible with vanilla DOOM
when checking textures, ignore ones beginning with '#'
show version in the About box (not just the window title)

Bug Fixes:

fixed not loading 'ASHWALL' texture for DOOM 1
fixed bug when saving and using the 'ExMx' buttons (an erroneous newline was added into the map's lump name)
3D view: fixed a vertical mis-alignment of textures (one pixel) in certain circumstances
fixed occasional false positives with sector mismatch test
fixed wrong focal point when zooming immediately after the 'j' (JumpToObject) command
fixed category of linetype #68 (should be a raising floor)
fixed clipping of mid-masked textures (e.g. the cage in E1M9)
fixed not reloading textures (etc) when opening a new wad file
fixed crash when trying to build nodes on an IWAD map which has some changes made to it, but has not been saved (exported) yet
fixed key binding list so that pressing 'Bind', 'Copy' etc on a non-visible line will scroll to that line (make it visible)
browser: fixed patterns like '4$' not working properly